@PKJ You need to get it on techII,so it can read all the sensors to see which one is causing the issue..

 

Thanks for that. I take it that TechII is a diagnostic tool. Is it something that I can use or do I have to go to a garage for that? If I can use it is there a particular model that you could recommend and where to get it?

 

The Tech II is a tool that was used by GM on various cars. It requires a specific Saab software card for your car.

You need to find a Saab specialist with the tool. Clones from China are/were available. There are few or no "standard auto scanner" replacements for a Tech II.

See the Tech II forum here for more information.

 

Thank you, let’s see how I get! I’ll put an update on this forum!

 

I bought a Tech 2 Scanner with Saab Software card. This is the message I got regarding my roof when I did sensor test: “ A possible sensor problem was detected. Blinking sensors did not change status as expected” “ Tonneau cover latched right, Tonneau cover latched left, Tonneau Cover up” so it looks like I need to change some sensors! Does anyone know where these sensors are located?

 

Tonneau cover latch right sensor is located in right hinge.
Tonneau cover latch left sensor is in left hinge.
I do not recognize tonneau cover up sensor.

Can you taka a pic of TECH2 screen where you have these?

 

I did a video clip as these three elements were flashing on my Tech 2

 

Where?

 

They were flashing on the Tech 2 screen. I’ll see if I can upload it for you to see

 

Not letting me upload it because it’s a video clip and not a photo!

 

Take a pic where all sensor faults are present.

 

Ok will do!

 

All of my sensors are located on the right side of my car (2009). Would I be correct in thinking the roof mechanism changed in 2003? My tonneau cover up sensor is located on the right side under the tonneau cover on the hydraulic cylinder.