Hold that Post!. I put in the wrong web address. Long day. Sorry I will have to find it again. It is am upgrade for $75 US. I will post it when I find it.

Greg

 

Ok Found the link.

Taliaferro Saab

Site is down at the moment but has anyone used one of these?

http://www.genuinesaab.com/detail.asp?product_id=chip

 

i believe that taliforo saab carries the speedparts chip and speed parts is one of the best saab tuning shops.
also very reputible from what i hear.

 

That was the answer I was looking for. Any one her used that chip?

Greg

 

Taliferro Saab Chip

I orderd one and i put it in correctly and my car would not start...hah.....but looking at the chip the 538 for the ecu number was only showing a little bit. So maybe they mixed up the chips i don't know. But i called nick and he gave me a refund and i told him i wanted to try another one. 2 months later he got more in but they didn't have any rev limit on them so another words he wouldn't sell them due to the danger. That was back in march, now its june and he is still trying to find out what the story is with everything. :-? I'm going to call him today ...

 

who needs a rev limit?
i dont!
just dont sit there and hang the engine at 7 k constantly.

 

I've run the SP LH2.2 chip and I've run boost up to 1.4 bar without any problems

 

Stock injectors?
Would blue series from Swedish Dynamics be a worthwhile addition to this set up?

Greg

 

I use the stock injector with that chip!

The speedparts chip supports only the stock injectors.

If you want larger injectors you got some alternatives:
- add larger injectors do the resistor mod
or
- add larger injectors and get a custom chip for the new injectors.

I'm doing the custom chip upgrade. It's more expensive, but I feel alot more calm when I know that the chip and injectors are "made" for each other.

Just adding larger injector might get the car run rich at idle.

 

Thanks, That is what I though I read. What is the life expectance of the stock injectors? I can't tell if mine are original but I would expect they are. 168000 on the clock. Wondering if I should change them. Any source ideas?

Greg

 

injector cleaner does wonders.
dont get anything too powerful as it will eat through the rubber in the gas tank as well as muck up your lines.
i personaly use the stuff made by chevron which is called techron.
works a treat and have not had any troubles with it.

 

i have also heard good things about the speedparts chips. I am thinking about getting the LH 2.4 chip for my 89 SPG. The only thing i want to know, is if the chip gets rid of the overboost fuel cut-off. I know that in the LH 2.4 cars the overboost cut-off is done through the ECU. I would assume that since this chip raises the rev limit fuel cut-off, it also gets rid of the overboost one also. Anyone know about this??? I would love to use this chip and i would rather like to avoid having to add a resistor to my AMM as this could wind up making the car run too lean or too rich. Also, how much boost can one use with such a chip, stock injectors, and a 3.0bar FRFPR??