So I went out and bought a new wiper motor from a junkyard today, and spent $40 on it. So after I get it done I decide to disect my old one that had the return to park issue causing to only have med and high which will stop wherever it is when you turn them off, and no washer fluid function. What I find is good news for others. A simple resistor and soldering will fix it. I will post more in the morning when I am not on my iPhone, and do a full write up. (on the downfall I managed to lose the resistor before metering it)---after searching around on my garage floor for about half an hour I found it.---