If there was a hole you should have fluid loss. I agree, check that they aren't clogged up.
Window Wiper Fluid only works on passenger side. Mystery hole on driver side...
1998 900S Convertabile:
The wiper fluid on the driver side has VERY poor output: the dual stream travels about 2 inches. Been this way for a while, just getting around to fixing it. On the passenger side it works great.
I checked the fluid line, and there is a hole in the bottom of the three way connector on the driver side. Only thing is this whole looks intentional, like that is the way the three way connector is designed. I can't figure out how the fluid on the driver side is effected, but the downstream passenger side is just fine. Any ideas? Should I just plug it up, or is it some kind of overpressure relief thing?
Thanks.
The wiper fluid on the driver side has VERY poor output: the dual stream travels about 2 inches. Been this way for a while, just getting around to fixing it. On the passenger side it works great.
I checked the fluid line, and there is a hole in the bottom of the three way connector on the driver side. Only thing is this whole looks intentional, like that is the way the three way connector is designed. I can't figure out how the fluid on the driver side is effected, but the downstream passenger side is just fine. Any ideas? Should I just plug it up, or is it some kind of overpressure relief thing?
Thanks.
1 - 2 of 8 Posts
I use one of those every time I do a wax job. No matter how careful I am!!! I actually have a gold plated one I use. It has a larger diameter for increaded load bearing. :cheesy:
1 - 2 of 8 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
SaabCentral Forums
SaabCentral forum the most comprehensive Saab resource on the internet. Join our discussions on the Saab 9-3, Saab 9-5, Saab 900, Saab 9000 and all other Saab models, choose your forum.
Full Forum Listing
Recommended Communities
