[el-tel]

Hi

Just asking for some knowledge, looking at a set of 8x17's with an offset of 30 for a std ride height Aero. Would these fit or would there be more work involved, arch rolling etc.

Cheers
Terry

 

[raske9k]

They should fit fine, interference if any may be inside the wheel well at the rear. I have a set of 17x9 25et and they barely clear the rear suspension trailing arms and clear the outer lip by about 1 mm without rolling.

 

[el-tel]

cheers bud.


Hopefully will be able to get hold of them as i think they'll look well good.

 

[Returned]

Make sure the PCD is 4 x 108 and the centre bore is 59 or larger.

 

[Returned]

Also, when fitting aftermarket alloys, remember to remove the brake disc position pin (sticks out of the hub).

 

[LondonCSE]

and don't forget to tell your insurance company....

 

[el-tel]

Others that i have looked at are 7x16's with an ET of 20. would i be right in saying there would not be enough arch clearance??