SaabCentral Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
321 Posts
Discussion Starter · #1 ·
Going to be getting a new bumper thru insurance, and wanted to see about using the Viggen unit instead.

I have the orginal 9-3 SE bumpers right now, so its lower than base cars already. How much lower is it at the rear of the car? I have a hitch that I custom made and goes under the SE lip and clears by about 1".

If someone could get a measurement at the centerline of the car, from like the top flat surface of the bumper to the bottom of the lip it would be frickin amazing!:cool:

Thanks in advance!
Terry
 

·
Registered
Joined
·
38 Posts
Appproximate measurement from ground to lower edge of bumper is 32cm, from ground to upper edge of bumper is 60cm (so top of bumper to bottom of bumper=28cm). I attached a photo that you can zoom in to see the measurements.
 

Attachments

1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top