[1994aero]

Hello,

my turbo has started playing up this morning on the way in to work....fine last night. The turbo guage is not moving unless i floor it and then when the turbo cuts in it is all erratic and i can hear the dump valve going intermittenly. What has happened to my turbo?

Cheers

 

[Marrk]

Check to see if the acuator arm has fallen off the wastegate linkage first.

 

[1994aero]

Cheers for the reply. what does the actuator arm look like and where might I find it? Thanks

 

[boxman]

if you follow the pipes from the apc solinoid on the radiator fan, 1 will go to a cylinder shapped thingy with a rod coming of it and the other end of the rod should be connected to a little lever on the exhaust side of the turbo, but also check to see if your dump valve is ok, if its stuck open or split you will have prob's