[Djfremen]

Los Angeles / Santa Monica.
If I come to you - 55$
If you come to me - 35$

 

[Djfremen]

Anyone with a TECH 2 in socal or close by. I need ecu and new key programming. I will drive to you. Thanks.

Santa Monica.

 

[Djfremen]

You have a pm.

Never received PM. Weird.

 

[Djfremen]

Moved to East Bay north of San Francisco (Benicia).

I provide the following services:

-Add keys & modules via Tech2

-Reprogram CIM (without keys) via EEPROM & Hitag 3.1 (no Tango HW)

-Rechip / solder old keys and re-code via Zedbull

I have about 8 renewed keys and 1 spare CIM.

Sent from my EVR-L29 using Tapatalk

 

[Djfremen]

My son has lost all keys for his 2004 Saab 9-3. He’s in south bend. Can driverjon help?

my telephone number is +19145252396.
best regards
Sesh Murthy

I can help him and sent you a dm.

Sent from my EVR-L29 using Tapatalk

 

[Djfremen]

AND he will need a Tech2 with security access to Marty the CIM to the car.


Sent from my iPhone using Tapatalk

Writing 93C66 is a tried & true solution WITHOUT the need for Tech2.

All Keys Lost isn't a big deal if you can solder and have the right gear. In fact, I normally grab the CIM while at the yard regardless of whether I find a key, as it's cheap to mate one later.

Even bad Chinese keys (non-precode) are added without issue using the EEPROM method. Good luck trying that with Tech2 (new never added key detected error below).

Sent from my EVR-L29 using Tapatalk

 

[Djfremen]

Moved to South Kona (Big Island of Hawa'ii) and can potentially fly to other islands. Have Tech2, Tango & Gambit + soldering station. Can clone and diagnose ECM (provide spare please). Can re-key in "All Keys Lost" situation if you can send me your CIM. Can re-solder damaged keys as well as pre-code blank for SAAB (image generator).