[Dynaguytn]

My 900SE got drowned by a Hotel that does not clean their storm drains. Got an '04 9-5 ARC Wagon to replace it, diggin it.

Tryin to replace a taillight, and a little nervous;
These fasteners rotate, but don't turn to a free position. Are they some 1/4 or 1/2 turn locking screw, or should I just plier these plugs out to get to a (torx?) behind?

It's new (to me) and I don't want to start out by damaging it ...

Thanks for any help,
Richard

 

[gghh]

They are 1/4 turn locking screws. Remove the black plastic after unlocking, start to pull from the top of the light.

 

[Dynaguytn]

Thanks!

Thanks GGHH! I was being sloppy, :roll:
it's EXACTLY 1/4 turn, no less, no more!
Thanks for your help!