[aus715]

Hi all,

MY02 Wagon rear LH wheel bearing won't come off.
Had it all pulled down, but could not get the bearing to 'withdraw'. Have given it a fair bit of encouragement with a mallet by belting the nuts on the studs from behind.

I am hoping it does not need a special tool to pull it off.

Any suggestions most welcome.

 

[gbest]

Did you remove all 6 nuts?
There are two more beneath the bracket for the emergency brake cable.

 

[Saaber95er]

Were you able to remove the Hub?

 

[aus715]

Not able to get under it today. Might have to wait until the weekend due to family duties, being the chariot. Thanks for the diagram, Saaber95er. Appreciated.
Is that an'02 setup? Pity the cross section does not show the studs.

 

[Saaber95er]

Not able to get under it today. Might have to wait until the weekend due to family duties, being the chariot. Thanks for the diagram, Saaber95er. Appreciated.
Is that an'02 setup? Pity the cross section does not show the studs.

Yes. it's the 02 setup,