SaabCentral Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
1,150 Posts
there should be six uh.. what were they, 7mm nuts holding each housing on. THen pop off the grille with a screwdriver. I was going to build my own 6x9 housing in place of the 6" cone and teh tweeter housing. Then, i got fed up and did this: mounted them right in my hatch board. After i finished tightening them down, they sounded pretty nice.


*edit*
you might have to pull down pretty hard as there is double-sided tape holding them up pretty tight
 

Attachments

1 - 3 of 3 Posts
Top