SaabCentral Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
10 Posts
Discussion Starter #1
Hello everyone.
I have a question about rear chassis tuning. On polish site, I founded full set polyurethane bushings for rear suspension http://mpbs.pl/I-97-09-c592
But, i founded on a different forum controversial info about it. Some people said what it's not good and preferably use poly only for bushing wishbone rear 12781136 and cross stay bushing 4566378. I'm confused, replace all bushings for poly or only two? Maybe somebody knows?
Thank you.
 

·
Registered
Joined
·
5,947 Posts
Stick with original rubber/metal bushings.
If polyurethane is really better than vulcanized rubber in metal ALL car manufacturers uses them.
Your real issue is undersized rear shock absorbers.
 
1 - 4 of 4 Posts
Top