[the Cheese]

I can't find the tightening torque for the pressure plate to flywheel bolts in the Bentley... I think it's supposed to be 30 ft-lbs, but can someone tell me for sure?

 

[s900snt]

I can't find the tightening torque for the pressure plate to flywheel bolts in the Bentley... I think it's supposed to be 30 ft-lbs, but can someone tell me for sure?

I dont know either, but I still have one sheered off in the flywheel from when I broke it months ago.....I'd wait for the number Adds a nice little low speed vibration. :-/

 

[john-w]

When not specified the following apply;

M5 5nm
M6 10nm
M8 20nm
M10 40nm

 

[Areomyst]

I also sheared off one of the bolts holding the pressure plate on. I diddn't find anything on the pressure plate, but I did find specs for the flywheel. :/

From the Townsend site:

Flywheel bolts 43 Ft. Lbs. (59 Nm)
Flywheel Seal Plate 14 Ft. Lbs. (20 Nm)

http://townsendimports.com/Web/engine_folder/torspeceng.htm


~Josh