SaabCentral Forums banner

pulling fault codes

848 Views 1 Reply 2 Participants Last post by  ProfZ
Hi, My 1st post... just bought a 900 S Convertible, having idling problems and performance probs, engine light comes on occassionally too.
So I read the instructions for pulling fault codes, the only thing is, where is the 3 pin connector and yellow/white wire from it? theres only one plug that i can see that isn't plugged into anything that sits close to the AIC valve, but only 2 wires come from it and they are brown and an orangey one, am i looking in the right place.

Thanks in advance for your help
1 - 2 of 2 Posts

this will tell you what the connector looks like, and where it's located--plus, you get a list of fault codes.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.