[toxicavenger]

Over the last few years I have replaced all the hoses on my car. I have bought the new hoses from multiple vendors so I am not sure who I got this one from. What I do believe is that it is a Pro Parts hose. I am pretty certain this hose is only about 2-3 years old.

When I was working on the rear throttle body hose I notice the lower throttle body hose on the front bottom side was bulging at the clamp:roll:. I cut about 3/4's of an inch off and put it back on for now.

Check out this pic I took of the end I cut off. It looks like the hose is actually separating on the inside.

 

[horsehockey]

Isn’t that the one that’s double walled with the exterior rubber and a hard plastic liner?

 

[toxicavenger]

Isn’t that the one that’s double walled with the exterior rubber and a hard plastic liner?

No it is the one on the front of the engine filled with coolant. The one on the rear is double walled and filled with air. ;ol;