SaabCentral Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
138 Posts
Discussion Starter #1
I'm attempting to put the Griffin bumper on my 08 Aero (https://www.esaabparts.com/viewparts.php?searchpart=1&section=93100000), but can't for the life of me figure out where and how parts 5, 12, and 23 install. Very confused as these parts were missing on my last bumper. Can someone please give me a detailed description or take some screenshots from the WIS? Would love to use the WIS but all I have right now is my Android phone. Have to travel tonight so please respond quick!

Sent from my Pixel 3a using Tapatalk
 

·
Registered
Joined
·
138 Posts
Discussion Starter #2
Figured it out after many hours. This thing is like a puzzle! Anyways, heres some pics that might help others if you go through the same frustrations. The longer support piece goes on the inner bottom of the bumper and screws down. The headlamp washer hoses and foglight wires for into the grooves. Make sure to install all the retaining clips and bolt everything down snug.


Sent from my Pixel 3a using Tapatalk
 
1 - 2 of 2 Posts
Top