SaabCentral Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
3,421 Posts
Discussion Starter #1 (Edited)
Does anyone have a diagram or picture showing the actual EZK box and the numbering of the pins for it and the ignition amplifier in the Bosch system?

It's tricky to find it and you've think it would be in the service books, but it doesn't seem to be.

The box itself and the hardness connector don't appear to have pin number marked but if I find it I'll report back.

Ta.
 

·
Registered
Joined
·
3,421 Posts
Discussion Starter #2
Righto took matters into my own hands as I needed to complete tests, and pulled the PCB assembly out of the box to find the back of the connector soldered to the PCB shows the pin numbering...

https://flic.kr/p/2jeNTbW
The ignition 'amplifier' modules actually have pin numbering on the module itself.
 
1 - 2 of 2 Posts
Top