SaabCentral Forums banner

1 - 20 of 21 Posts

·
Registered
Joined
·
668 Posts
Discussion Starter · #1 · (Edited)
As title states, I am parting out a 98 900s turbo 3 door, automatic, imola red. It was a 2 owner car and well cared for.Engine,trans, turbo only has 112k and was in perfect running order before getting hit in the rear quarter.All parts are for sale. I also have a bunch of extra parts I have collected over the years that I am clearing out of the basement.
We are moving soon and this car will go to the crusher at that time.

Some items include:

Foglights
Clear and amber side indicators
Front lights
Rear lights
Grill
O2 sensor that was bought but never used. Previous owner had 7k miles on it.
Sport exhaust
Black Leather seats front and back a 2000 9-3 non power.
Body panels are rust free
All glass
Manual climate control
ACC
SID
DIC
Engine bits
Interior bits
Etc.

I can post pictures as requested. Thanks.
 

·
Registered
Joined
·
668 Posts
Discussion Starter · #4 ·
I'm interested in the front bumper...let me know how much you were looking to get for it.

Thanks.
Front bumper sold.


Clear indicators sold.


Amber indicators pending


Manual climate control pending


Thanks
 

·
Registered
'02 9-5 Aero Wagon, '88 SPG, '02 Viggen Vert, '01 Viggen 4dr, +Triumphs & MGs
Joined
·
1,748 Posts
Hows the carpet - particularly drivers footwell? Color?
Thanks!
 

·
Registered
Joined
·
668 Posts
Discussion Starter · #14 ·

·
Registered
Joined
·
21,583 Posts
I need a dimmer switch, PN 46 17 460, for a '96 900.
Also, most importantly , a RS (pass) front door power window motor, its still in place, I've yet to drill out the mounting rivets for the assembly..
Please do eMail or reply to this post
[email protected]
TIA
 

·
Registered
Joined
·
4,503 Posts
Transmission speed output sensor? PM me a price on one. There is a chance I might need one later this week.
 

·
Registered
Joined
·
668 Posts
Discussion Starter · #17 ·
I need a dimmer switch, PN 46 17 460, for a '96 900.
Also, most importantly , a RS (pass) front door power window motor, its still in place, I've yet to drill out the mounting rivets for the assembly..
Please do eMail or reply to this post
[email protected]
TIA
Do I have to drill out to get this window motor out?
 

·
Registered
Joined
·
21,583 Posts
Do I have to drill out to get this window motor out?
No....
flashlite and mirror
Quarter inch drive and a torx 20 or 25...and a 3 to 4 inch extension....remove the 4 screws and the motor can be gently extracted along with the plastic brush/electronics holder....as one unit....
Overall, a fairly easy job, after the panels are off.
 

·
Registered
Joined
·
21,583 Posts
No....
flashlite and mirror
Quarter inch drive and a torx 20 or 25...and a 3 to 4 inch extension....remove the 4 screws and the motor can be gently extracted along with the plastic brush/electronics holder....as one unit....
Overall, a fairly easy job, after the panels are off.
The same effect as a "bump"
I need a motor and a dimmer...
Actually, I need a diesel VW truck....which will be more difficult ?
And, see the "Wanted".
 
1 - 20 of 21 Posts
Top