Optimum No Rinse
1 - 2 of 2 Posts
Joined
·
17,674 Posts
I dunno. It's a standard clear coat paint by 2003, so judge by that. A buddy of mine is big on this stuff now for his Viggen https://www.amazon.com/gp/product/B01IB163O6/. Says it's great to keep the car spiffy between major washes.
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
"Key Not Accepted" Saab 9-3 2000 Convertible
NG900 & OG9-3 WorkshopI have read a huge amount of threads on here and still can't find the answer. Drove car for a long trip and parked it on Friday. Sunday before the snow storm headed back. Got into the car stuck the key in the ignition and got the "Key Not Accepted" on the SID. I could also hear what is probably...- 80
- 8K
-
TD04 Turbo Internals
NG900 & OG9-3 WorkshopHi guys, I've been working on trying to source a TD04 to upgrade to in my 9-3. I pulled one from a junkyard, and when I split it apart, it's pretty obvious the fins on the compressor wheel are chewed up and will need to be replaced. I'm pretty much trying to see at this point if the housing is...- 6
- 70
-
lBasket · updated
-
Rear shock bushings
NG900 & OG9-3 WorkshopSo far i have come up empty looking for the rear shock bushings. Is there an alternative or something thats close enough? Perhaps from a gm product or a german car maybe? I wouldn't bother except mine are soft and cracked like every other peice of 20 yo rubber. And im about to upgrade my...- 26
- 367
-
IAC valve and ACC problem
NG900 & OG9-3 WorkshopHi, I have a problem with my car, 1996 Saab Ng900 turbo. When I turn on ACC the rpm of the engine decrease to 800 and even 750. Without the ACC the engine works at 950 - 1000 rpm. I have read that the connector 1 of the IAC valve comes from pin 49 of the ecu. This one gives more "power" to the...- 19
- 261
-
P0300 Issues
NG900 & OG9-3 WorkshopI have looked this up and seen quite a few threads, most of which end without ever divulging the issue. I recently did the PCV update to the She Saab as well as replace the aging and cracking vacuum lines. In doing so I noticed that the brake booster vacuum line assembly was cracked at a one...- 24
- 331
Join now to ask and comment!