SaabCentral Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
22 Posts
Discussion Starter #1
Installed a used TWICE in a 2001 Saab 95, all went well, car now starts and runs but drivers side widows stopped working. They used to work before installing the new TWICE. I worked on the car outside so I rolled them down while doing the service.

Question. Do they need to be "added" again with the TechII? Is there a procedure I need to do to bring them back online? I'm getting pretty familiar with the TechII operation. I've used it to reprogram a used ECU for a 93, reset a top on a 900S and other basic diagnosing and testing. I've been in the auto repair business for years using various scan tools. Just need a little guidance here. :cheesy:

Thanks
Dean
 

·
Registered
Joined
·
22 Posts
Discussion Starter #2
Ha!! I'm laughing at meself. Someone installed a 10 amp fuse where there should have been a 30 amp fuse for the left side windows! Of course it blew! New fuse installed, all is well.
Just goes to show ya, it's usually the simple stuff that fails. :)
 
1 - 2 of 2 Posts
Top