Joined
·
33 Posts
I have posted this on the tuning forum but am not getting any help, so thought I would ask here.
I have finished a few upgrades and could use some help with the tune.
99 9-3 base automatic
Currently installed:
air intake,
Straight pipe catless 2' 1/2" turbo back,
Upgraded to Td04 Fresh rebuild with billet compressor,
Viggen intercooler,
T7 APC,
Removed second O2 sensor,
Completley removed A/C system and ran 1805 short belt.
I have taken the 204r bin and modified to stage 3 and setup for t7 apc, I know I need to modify Reg_kon_mat_a but am unsure what would be a safe level to change the percent values for the TD04. Any help would be greatly appreciated.
I have finished a few upgrades and could use some help with the tune.
99 9-3 base automatic
Currently installed:
air intake,
Straight pipe catless 2' 1/2" turbo back,
Upgraded to Td04 Fresh rebuild with billet compressor,
Viggen intercooler,
T7 APC,
Removed second O2 sensor,
Completley removed A/C system and ran 1805 short belt.
I have taken the 204r bin and modified to stage 3 and setup for t7 apc, I know I need to modify Reg_kon_mat_a but am unsure what would be a safe level to change the percent values for the TD04. Any help would be greatly appreciated.