[Wofy]

Hi guys,
Really need help, i was updating my 9-3 2008 2.8l V6 through Tech II remote proceedure, it started programming and at 5.5% of the programming it failed as it seemed like it drained the battery. I have charged the battery all night and it was at 100% tried to reprogram it but it blocks always at 5.5%.
And as always it drains the battery during the update.
While updating the headlight turn on automatically just as an info, any ideas out there?

 

[Mimmi]

Bad ECU or TECH2.

 

[dspargo]

Did you leave the charger on? You should have done so.

 

[Wofy]

Yes the charger was on, i tried again today same thing, ther errors are the following:
Utility 9C2560NH
Line 06 Operation 50 Errorcode 00
Line 13 Operation B0 Errorcode 85

This always at 5.5% of programmming

 

[IndyMatt]

I had a ECU update fail last night, are you using a RS232 to USB adapter? Mine was failing with an adapter so I pulled a prehistoric relic of a desktop out of storage and used GlobalTIS on a dedica serial port and it ran with zero issues. Best of luck.

 

[Wofy]

Thanks, still trying no luck so far

 

[Mimmi]

Buy another card.