SaabCentral Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
21 Posts
Discussion Starter #1
I`ve got a 03 9-3ng (production date 11/02) and by looking at the VIN its a really early editon of the car..
Its a Linear with Sentronic auto 5s box.I got hold of some steering wheel shifters and added them with Tech2 and everything but they dont work..
I`ve checked If the`ve got signal with the tech2 and they do but It seems like there is something missing to get them working..

I think I read somewhere that the early editions was missing something maybe in the TCM module or harness to the CIM?

Can anybody provide me with anymore info on this subject?

Thanks!
 

·
Super Moderator
Joined
·
20,205 Posts
Mine is 9/2002 build but had no issues adding. Very odd. Try adding the CIM. i think there is something in there that asks about paddle shifters. worth a try
 
  • Like
Reactions: Saablabra

·
Registered
Joined
·
21 Posts
Discussion Starter #3
I more and more actually suspect a fault in the harness between cim and steering wheel...But than again why do I have a signal/voltage shift
 

·
Registered
Joined
·
8,889 Posts
You need to add CIM and SID with TECH2.
 
1 - 5 of 5 Posts
Top