SaabCentral Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
139 Posts
Discussion Starter #1
Here's what I've got:


Yes, I changed the fuel level #'s. Would it be more accurate to change the 1/4 marking to 1/8?
I want to put the set of 'em in but would like to have the approximate boost level marked, like aftermarket guages do. I need to take the dash apart anyway to fix the cracks, the tachometer and I want to check/replace the vaccum lines.

If you want to modify it yourself Microsoft Paint should get it close, then I can "finalize" it with Photoshop.
 

·
Registered
Joined
·
751 Posts
end of the yellow is roughly 0.85bar
 

·
Registered
Joined
·
139 Posts
Discussion Starter #3 (Edited)
Long as 0.85 bar is roughly 12psi this should be close right? I figured 0psi/bar is where the needle is when the engine isn't running too.

Whats the min/max the guage can do? I don't plan on going to max pressure but it'd be neat to know what the guage can do.

Oh, I realized I was keeping the pic at the "normal" size so I made this one more managable.

edit: If someone didn't know, I started with the set avaible on 900aero, minus the speedometer 'cause that died (on the site):confused:
 
1 - 3 of 3 Posts
Top