SaabCentral Forums banner

1 - 6 of 6 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Hello all, im working on my 86 turbo 16v. My current problem is no spark. I have replaced the ignition coil and all leads, and am getting 12v on the positive cable that powers the coil. Still no spark from the main coil wire. Anyone here possibly know whats going on?
 

·
Registered
Joined
·
9,366 Posts
I am not familiar with the C900 layout, but on my NG900 one of the primary (low voltage) coil wires frayed and eventually failed intermittently. Assuming that the ECU controls the ground to energize the coil, I'd make sure that the wire has no kinks and makes a good connection to the ECU.
 
1 - 6 of 6 Posts
Top