Hi, I've been researching LEDs because I go through halogens every 3-4 months and it makes sense. Except does it? There are tons of discussions about how good LEDs are but I can't seem to find anything on this car. I know it's a H4/2003 bulb but has anyone successfully converted without SID errors and proper beam? Thanks in advance
Is there an LED conversion for 2002 9-3?
1 - 3 of 3 Posts
1 - 3 of 3 Posts
Join the discussion
Recommended Reading
-
The pain in the **** that is insurance
NG900 & OG9-3 WorkshopSome old dude in his merc pulled out in front of me and wrecked my NG900, car is totaled the whole front is smashed, airbags blew and windshield got smashed in the process. Insurance calculated that they're gonna give me 500€ to cover the damage, which i find ridiculous since i paid a lot more...- 2
- 12
-
1995 Saab NG900 won't rev past 3k RPMs
NG900 & OG9-3 WorkshopSorry if this is hard to read. Posting it from mobile. So after pulling the tranny out to replace the throwout bearing, I put the whole thing back together to find that the car wouldn't accelerate past 3,000 RPMs even in neutral. It sputters at about exactly 3000 RPMs. When I was trying to...- 5
- 96
-
Can the clutch fork position be adjusted from the inspection hole?
NG900 & OG9-3 WorkshopSo it's looking like I royally screwed up my throwout bearing job. My understanding was that the pole the fork is on had a certain spot for the bolt to go through, but now that my clutch is only engaging on the very last bit of the pedal release that is obviously not the case. Cable is adjusted...- 0
- 24
-
Help me identify this part? / and starter diagnosis.
NG900 & OG9-3 WorkshopI was pulling my starter last night on my '99 93 2.0L, laying on my back under the car, and as I slipped the starter off the mount bolts, this piece below fell from somewhere and hit me in the head. Is it related to the starter install? A shim of some type? Or is it some unrelated part? Any...- 18
- 2K
-
Power seats
NG900 & OG9-3 WorkshopHi both power seats staring not working just really would like to adjust back though I checked fuses in the trunk but looked fine and I understand there might be a connection in back seat driver side behind the cover would like to cover all bases before that do you have a diagram or path to...- 4
- 118
-
Mariosaab · updated
Join now to ask and comment!