SaabCentral Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
85 Posts
Discussion Starter #1
I need to replace my lock actuator in the pass door of my 9-3. I have no idea how to tear the door apart to do this, can anyone explain how?

I'm trying a save a labor bill and a day without my car.
Thanks
 

·
Registered
Joined
·
60 Posts
I thought I needed a new acctuator on my rear passenger door, but was relieved to find that it was just the wiring plug that fallen off. The socket on the acctuator points down at about 45 degrees. If someone has unplugged it previously, and not pushed it all the way back on until it clicks, every time the door is slammed shut, gravity will slowly take over! My door must have been resprayed at some time because of the old masking tape over the holes for the plastic side trim clips.
 
1 - 3 of 3 Posts
Top