[Lassie]

Hi !

Excuse me if my question had been aswered tons of times Before. But I dont know what to search for name of this part (Circled in Picture).

(http://misc.radiolank.se/#!home)

Searching the cause of my 1181 -error i found in this excellent forum that I had to Clean my MAF (Done that now) and check for loose hooses.

Doing the later I found the pictured Little thing that is very loose, possibly dried out /broken plastic. I dont know it´s name in Swedish and even less so in English.

Could this be the root cause for ERR 1181 and occasionaly lack of Power when accelerationg from zero?

Whats the name of the part (Swe/Eng), where to get it? Any help appreciated.

(My car is a 9-5 Biopower 2007)

 

[fob]

Pcv check valve IIRC

 

[OZY]

You will need to replace the whole assembly as the check valve is attached to it. http://www.eeuroparts.com/Parts/9319/Oil-Trap-Hose-5955927/

 

[indy500]

You could actually search for a thread entitled 'what's this part' and you would hit the jackpot :
http://www.saabcentral.com/forums/showthread.php?t=225293

There are a few links in that thread. I posted to another thread with the procedure I used to get the old part out - the bottom connection is the one that is a pain.
http://www.saabcentral.com/forums/showthread.php?t=219779

And it was the source of setting P1181 in my 2004 and after replacement, the code has not returned.

 

[Lassie]

Thanks everyone for your help. A new part is ordered from speedparts.se.
Just by looking at I do realize that the installation won´t be easy

 

[finding41]

You could actually search for a thread entitled 'what's this part' and you would hit the jackpot :
http://www.saabcentral.com/forums/showthread.php?t=225293

There are a few links in that thread. I posted to another thread with the procedure I used to get the old part out - the bottom connection is the one that is a pain.
http://www.saabcentral.com/forums/showthread.php?t=219779

And it was the source of setting P1181 in my 2004 and after replacement, the code has not returned.

I just took mine off. Squeeze the white sides and pull on it. Slips right off.