SaabCentral Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Car: Saab 9-3 2006 1.8t 2.0L 110kw
Hello, new to this forum so if there's a thread/post about this already please let me know.
So, pretty recently the high mounted stop light started giving me problems. SID started throwing out warnings about that lights failure every day, either as soon as I press break pedal after starting the car to start going or after some time while driving and what not.
I took it out last week and had a friend of mine check the "diode unit" out, replaced few LED's since few of them were burned out and new diode, seemed to work for a day or so and it got back to acting up.
The light itself when pressing break pedal is either Fully Lit, Half lit or not lighting up at all at. If its half lit then it's slightly dimmed.
Any help would be appreciated even if little!
Rectangle Line Automotive exterior Font Parallel
 

Attachments

·
Registered
Joined
·
10,922 Posts
Diode unit P/N: 12797855
ORIO have 50 units in stock in Nyköping, Sweden.
 

·
Registered
Joined
·
2 Posts
Discussion Starter · #3 ·
Didn't really wanna buy a whole diode unit, but seems like I'll have to do it in the end, wont rush it tho. Playing around with it managed to make 12 LED's out of 14 to light up properly at all times when pressing the brakes. The SID Error/Warning still pops up now and then.
Appreciate the help for the code!
 
1 - 3 of 3 Posts
Top