SaabCentral Forums banner
1 - 2 of 2 Posts

13,053 Posts
Hi and welcome.
Disconnect battery first and after that remove UEC (pic shown) and try to dry it.
UEC removal:
Remove tx25 screws in both ends
Remove power supply connector nut (13mm)
Use an 8mm hex socket or E torx and loosen three (3) screws (do not come loose).
When they are open, tap screws down on sleeve, causing connectors to disengage from bottom of UEC.
You can now lift UEC off.
1 - 2 of 2 Posts