SaabCentral Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
290 Posts
Discussion Starter #1
Is there a way to remove the plastic facing (the "glass") off the headlamp assembly without breaking it?

I tried using a flathead screwdriver but I didn't want to force it out and crack it open or bust a seal or something.

Thanks
 

·
Registered
Joined
·
3,951 Posts
Try using a heat gun or hair dryer to soften seal then pry it off with a screwdriver.
 

·
Registered
Joined
·
290 Posts
Discussion Starter #3
Try using a heat gun or hair dryer to soften seal then pry it off with a screwdriver.
good idea, would I have to re-heat the seal when I re-installed the face?
 

·
Registered
Joined
·
3,951 Posts
I don't know if that will work; I would just use a good 3M brand sealant to reseal it; or if you don’t intend on taking it off again you could glue it.
 

·
Registered
Joined
·
8,293 Posts
You are supposed to be able to bake them off but that never works so well. WHat is the problem, if its cloudy you can clean it
 
1 - 5 of 5 Posts
Top