Holy, yeah! If I were staring down $1200 for a head, I'd start looking for a new car!
Head Needs Fixing
I need to replace a warped cylinder head. Two choices;
1) go with the Saab dealers second hand one, rebuilt in Germany where car is located/stranded Cost = 100%
2) The second hand one I have needs welding in three places, between the intake and exhaust valves. It also needs seven valve inserts replaced.
It is with a very competent specialist, CTM in Essex. They say they have welded many alumn Ford heads that have stood-up to many years of 25psi w/o trouble. Cost = 50%
Do I dare go with option number 2?
If I do go with number 2, should I bother and tranfer my cams/springs/valves from my warped 77k miles head to the repaired head which has w/in tolerance valves/springs/cams but 177k miles?
Any comments much appreciated.
1) go with the Saab dealers second hand one, rebuilt in Germany where car is located/stranded Cost = 100%
2) The second hand one I have needs welding in three places, between the intake and exhaust valves. It also needs seven valve inserts replaced.
It is with a very competent specialist, CTM in Essex. They say they have welded many alumn Ford heads that have stood-up to many years of 25psi w/o trouble. Cost = 50%
Do I dare go with option number 2?
If I do go with number 2, should I bother and tranfer my cams/springs/valves from my warped 77k miles head to the repaired head which has w/in tolerance valves/springs/cams but 177k miles?
Any comments much appreciated.
1 - 1 of 7 Posts
1 - 1 of 7 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
SaabCentral Forums
SaabCentral forum the most comprehensive Saab resource on the internet. Join our discussions on the Saab 9-3, Saab 9-5, Saab 900, Saab 9000 and all other Saab models, choose your forum.
Full Forum Listing
Recommended Communities
