SaabCentral Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
105 Posts
Discussion Starter · #1 ·
Hi Guys,
I have just fitted new discs(rotors) and pads allround on my 1999 9-3se getting ready for the mot and then a driving holiday. I also fitted new handbrake shoes while everything was off.WHAT A PERFORMANCE fitting the shoe retaining springs. As a trucker my hands are like shovels and I had trouble holding/pushing/twisting/seating/seeing all at the same time.Is there a specialist tool for this job or has anyone any tips for the future? Its just as well I have a lot of patience otherwise I could see something being launched over the house.Thanx.
Greeny;)
 

·
Registered
Joined
·
105 Posts
Discussion Starter · #3 ·
They were only about 50% worn but I wanted to renew evertyhing while it was all stripped.Before I had one side holding on about the 7th click, but now both sides lock on the 4th click.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top