SaabCentral Forums banner
1 - 1 of 1 Posts

· Registered
21,586 Posts
Hi Guys,

I have a problem where the metal brake dust cover on the from right wheel is loose and hitting the brake disk. I am pretty certain that there is low risk that it will actually come off. I do want to fix it as the noise is irritating me. I have taken the wheel off and had a look but can not seem to find any bolts that need tightening.

My question is whether anyone has some diagrams that I could look at so I can see what I need to be looking for.

Loose screws can be a PITA. I'd use anti-seize and over-torque by a little.
Locktite ?
Seldom is the dust shield removed, but I had one on the old VW that was slowly removing itself via rust. Sometimes the shield is bent, easy to re-bend.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.