SaabCentral Forums banner

Engine swap?

860 views 1 reply 2 participants last post by  Joshinator99 
#1 ·
Hi guys, first post here.

Not sure if there is much info out there but how difficult would it be to swap the 2.8 v6 into a 2011 9-5 vector (obviously built with the i4)?

Does anyone know if people have done this or have any helpful info in this regard?

Thanks.
 
#2 ·
That would be a project not worth undertaking. Wiring, programming, etc would be a nightmare. You can easily get more power out of your 2.0T with tuning, etc. If you really want the V6, the Aero version NG 9-5 can be had for not much more money. Easier to swap the car than the motor...!
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top