SaabCentral Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter #1
I'm doing an engine swap on a 1993 CSE, and I was wondering what lubricant/oil is used in the inner (transmission side) CV boot (the ones that cover that tripod with 3 rollers on the driveshaft). CV boot kits seem to have a heavy grease in them, however when I took the boots out, the lubricant flows like a heavy engine oil.
any help would be appreciated.
thanks
Don
 

·
Registered
Joined
·
5 Posts
It is actually CV joint grease and it is supposed to be pretty thinck...A napa or auto store should have some if you just go in and tell them u need cv axle grease...Hope that helps
 
1 - 2 of 2 Posts
Top