SaabCentral Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
301 Posts
i have a little bracket on the 3" adaptor (from MAF snorkel to filter) but i have seen a few that just hang there, either way will work. almost any 3" k&n will fit...take a look below. the MAF and snorkel just hang from my turbo intake pipe, basically resting on the inner fender. its an easy mod to do and, to me, the sound alone is worth it.
dave


 

·
Registered
Joined
·
301 Posts
the stock air filter box just sits in place and is anchored by pins on the top and bottom. i fabricated a bracket that is welded to the coupling (maf snorkel to airfilter) and bolts through where the pin used to enter the fender. if you take it apart it is rel easy to see and figure out, difficult for me to explain.


as far as the hazards of using such a setup, i have never had a problem with any of the cars that i have done this modification to. i am, however, very cautious in deep puddles, just as i would be with a stock setup. if you pay attention and realize the consequences of non regulated water injection:nono; ..you will be fine.
dave
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top