[Lambe]

Engine crank but not start

Fuel pump ok
Coil pack ok

I have tech 2

Any idea ?

Saab 93 Aero XWD 2008

 

[aerojon]

tc/abs module faulty known issue non start on V6..

 

[Lambe]

Abs light is on

I can try to bypass the abs module ?

 

[Diggs]

shove something between abs module and shock tower to put pressure on it

 

[Lambe]

Why put pressure on the abs pump?

 

[Lambe]

What advise me to check with my tech2?

For the abs module it's ok if I bypass it to see if the car starts?

 

[Mimmi]

Do you have enough gas?
Do you have any DTCs?

 

[Lambe]

The fuel gage indicates half. I also refueled and change pump.

No DTC stored.

But I have DTC informations with problem I can screenshot and posted here.

 

[Lambe]

News for you

Car start for 5 seconds but very hesitate and stall

Look at picture for code help me !!

ME9 (U0001)

 

[Mimmi]

So you have bad wire between CIM/ME9.
Use WIS to determine.

 

[Lambe]

How do you think this is the problem?

I saw that a copy of a tech 2 can lead to this kind of code?

Can the crank sensor be defective?

 

[Mimmi]

Is that DTC U0001 (00) from your car?
If yes, follow my advice.
If no, forget and continue with guessing.
CPS gives own DTC.

 

[Lambe]

You have reason because look code i have before they delete all

1. Bad cim possibly ?
2. Car crank not start
4. Thank for help

 

[Lambe]

after reading several article I really believe that my cim is the problem

What do you think ??

 

[Mimmi]

Might or not. Hard to tell from here.

Are those 31 DTCs present?

 

[Lambe]

Yes, 31 code before deleting them

Car cranking not starting

Code stored before they delete all

Now what is the first step to do?

 

[Mimmi]

Are those DTCs present now?

 

[Lambe]

Only 3

U0001 symptom is a bad module that I read on internet

 

[Mimmi]

Check first wire as I told you earlier.

 

[Lambe]

Which wire is it?

I have to take out the electrical plans for that