SaabCentral Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
65 Posts
Discussion Starter #1
When removing the lower radiator hose and the expansion tank hose that goes to the engine,it looks like you have to unbolt the compressor. it’s so tight to get your hands in there unless you do this .. what’s a good advise tip on this ..if you have to unbolt the compressor do you have to take the belt off to move it ?
 

·
Registered
Joined
·
7,146 Posts
You definitely wanna move the compressor. Remove all the belts (except PS), swing the alternator out, remove the three bolts holding the compressor bracket, then swing the compressor & bracket out of the way.
 
1 - 2 of 2 Posts
Top