SaabCentral Forums banner

Clockspring installation

3790 Views 5 Replies 4 Participants Last post by  pegasus50
I have a 1999 Saab 9-5 . I was wondering if has pictures or knows of a good DIY for installing a clockspring. I have tried googleing it but didn't come up with much. I also found a thread in the 9-3 section that gave vague directions but i was hoping for something with a little detail. Thanks for the help!
1 - 1 of 6 Posts
Turn the clockspring very carefully to one end and then back to other while counting the turns. The adjust to the middle position, and adjust your steering to the middle position. Disconnect battery and remove steering wheel, replace the clockspring and fit the steering wheel. Reconnect battery. If there is a SRS warning light it needs reset with Tech2.

Btw V6 is a GT15 :D
1 - 1 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.