SaabCentral Forums banner
1 - 8 of 8 Posts

· Registered
Joined
·
5,975 Posts
turbo bypass valve on a T8

It's a simple mod to do, just get yourself down to a local scrappy with a T16, make sure you get the rubber cuff on the turbo compressor inlet and the pipe from the tbv to inlet. I just cut one of the pipes off the throttle housing in half and connected the bov in using a t-piece.

I wouldn't bother on an automatic.
Should'nt that be

'I would'nt bov'er on an automatic'

:cheesy:
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top