SaabCentral Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
First of all we removed the engine of the car.
Removed all the parts from the block.

Then we started the honing process. This process can be found on youtube.
Cylinder honing process
The honing pattern is nicely 45 degrees (what is not visible on the video)

Removal of valves out of a cylinder.
Valve removal video
More video's to come. Gaping piston rings will be the next ones.

At this way we can share knowledge with other users.
 

·
Registered
Joined
·
3 Posts
Discussion Starter #3
Thank you for the positive remark. We try to make every time the video's a little bit better (sound, lightning, ...)

I there are requests for video's we are happy to hear them. We have a 93og and 95 standing.
 

·
Registered
Joined
·
17,226 Posts
For me personally, anything engine internal or transmission and transmission internal are very helpful.

A lot of the newer folks around here can use suspension rebuild videos.
 
1 - 4 of 4 Posts
Top