SaabCentral Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1,844 Posts
Discussion Starter #1
Gentlemen, I need some advice. I attempted to replace the axle bearing but got stuck at the point where the axle assembly was out, all bolts to the bearing bracket removed as well as the bearing cover plate. i could move the intermediate shaft with the bearing bracket about half an inch out of the transmission but then blocked by the alternator and no way to get it out, as far as I can see. Am I missing something? The WIS is silent on this obstruction and btw it’s on the V6 motor.
 
1 - 2 of 2 Posts
Top