SaabCentral Forums banner

1 - 11 of 11 Posts

·
Registered
Joined
·
511 Posts
Discussion Starter #1
Hey everyone this is for a 95 9000 Aero, but as far as I know the basic wiring and switch systems are the same and there is more activity in this forum.

I have some Baja Designs lights I am wiring up , but want to utilize the factory fog switch. How would I go about wiring this? I also want to deactivate the factory fogs as I don’t want current going to them anymore as one has wonky wiring.
 

·
Registered
Joined
·
511 Posts
Discussion Starter #3
Fog light relay -> lights. That's it!
But won’t that still power the factory fogs AND the new lights? Or can I just pull the fog light fuse and keep the relay ?

Do I just tap into one side of the relay or both sides?
 

·
Registered
Joined
·
511 Posts
Discussion Starter #7
So for those looking to do this I spliced into the factory relay at Pin 87. This has allowed me to use the factory switch for my aftermarket lights. I also disconnected my factory fogs at each housings harness, as the wiring was not working correctly anyway.
 

·
Registered
Joined
·
5,873 Posts
I don't have 9000 wiring diagrams, but there should be a fuse somewhere in that circuit. Hopefully there is!
 
1 - 11 of 11 Posts
Top