SaabCentral Forums banner

1 - 8 of 8 Posts

·
Registered
Joined
·
7,035 Posts
Use a kettle and boil some water. Pour the water on the body moldings to release them to avoid paint damage. THis works better vs: a heat gun :(.


THe holes are on the car that you need, they are under the current moldings.
 

·
Registered
Joined
·
1,407 Posts
bust out the drill and get'er'done
 

·
Registered
Joined
·
7,035 Posts
nnamssorxela said:
i hear that the "center 6" mounting holes are only under the mouldings of 91+ cars?
my 89' had em all:confused:
 
1 - 8 of 8 Posts
Top