SaabCentral Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
2,869 Posts
Discussion Starter #1
some idiot when my car was in the shop last decided to pull on my new cable. Now my clutch engages really low to the floor and i have to be very careful not to let it out too soon. I know you can adjust the cable by pulling on it (which he obviously did) but how do i reverse it? or can i at all?
 

·
Registered
Joined
·
761 Posts
hey man, try this!


Pull on the bare cable right at the clutch leaver on the tranny. You should hear some clicks, that will slacken it..

Then move the relay box out of the way and pull on the cable coming from the firewall. Just grab in front of the rubber piece from the firewall, you'll hear some clicks. This should remedy your problem.

Cheers.
 
1 - 2 of 2 Posts
Top