SaabCentral Forums banner

1 - 1 of 1 Posts

8 Posts
Discussion Starter #1 (Edited)
Hi Everyone,

I been trying to sort out the ACC on my 2000 9-3 AERO 2.0HOT and I think I have traced it to the clutch in the compressor.

When I turn on the ACC sometime it engages and others I can see the clutch
plate move in but it does quite make contact.

I have read that there are shims behind the clutch plate which can be removed but I thought I ask here before going any further.

Has anyone any experience adjusting the compressor clutch shims
on the SANDEN TRS105 in the 9-3

(Anyone recommend a good deodouriser for A/c systems)

1 - 1 of 1 Posts