SaabCentral Forums banner

9-3 2005 Stability Control Failure

858 views 2 replies 3 participants last post by  BornfromJETS 
#1 ·
The stability control failure notice is constantly on on both the dash board and the display panel.
Car drives fine but I'm wondering how I will pass the NCT (MOT)
 
#2 ·
There are so many parts/variables in the TCS system that the only way to find the problem is to have the car on a Tech 2 . This will tell you exactly where the problem is whereas without it you will be replacing part after part. Once you know where the problem is it is much easier to find a replacement part and fit it, or have someone fit it for you.

HTH
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top