I have a 1989 900 turbo convert. The wiring in the distributor has failed at the plug. the red wire is broken. I know there was a repair kit, but can't seem to locate one. Anyone got a suggestion? John in Baltimore, MD ( USA)
89 distributor
Join the discussion
Recommended Reading
-
Super Aero wheels on an 1986 SPG? Is it the same wheel bolt pattern?
C900 WorkshopI am looking to put some 16" wheels on my SPG for the summer, and continue running the 15" SPG wheels during the winter. I have found a good deal on a set of Super Aero's Saab part number 4425310 Before purchasing, I've been struggling to find out if the bolt patterns are compatible. Has...- 2
- 79
-
Searching only C900 workshop forum
C900 WorkshopSince the change in the look of the pages how can I search only in the C900 workshop ? This used to be easy and very useful.- 1
- 126
-
Brake Line Burst Under Driver's Seat
C900 Workshop1992 C900 Sedan. I've got brake fluid streaming out of the frame rail underneath the car almost directly under the B pillar between the front and rear doors, and I lost most of my fluid, but was able to make it home barely using the brakes. I'm assuming the metal brake line to the rear brakes...- 10
- 245
-
Sprung a leak- quick question to help diagnose please?
C900 WorkshopHi, Here's the info and the question on my '92 Turbo Vert: - Significantly large wet puddle of clean petrochemical fluid behind passenger wheel. - Some smearing like from a seep further forward on tranny case, but no active drip at that location. - CV boots and the passenger side steering rack...- 15
- 705
-
Check / remove timing chain tensioner
C900 WorkshopHi can someone give me a step by step guide on how to check / remove the timing chain tensioner on a 1991 16v 900? I can't find anything specific to the tensioner just on replacing the timing chain as well. I'm assuming its possible the tensioner is stuck in position due to lack of oil...- 13
- 169
-
troy1974 · updated
Join now to ask and comment!