[bennyinArizona]

anyone know how to get RCA cables to my trunk for my Amp ? i was thinking just to tap into one of the speakers for the signal but i figure it might not sound right since its already aplified by the Factory amp, but if anyone has ideas let me know please. thanks guys, btw this is my first posting !! woohoo !!!

 

[Diggs]

7/150 or 13/300 setup?

Also, try a search. This had been covered many times. :cheesy:

 

[black_linear]

Welcome Benny!

Your only choice is to tap into the amplified feeds to the speakers. The signal up to the amplifier is digital (optical) up to the amplifier. The only way to pull an anlog signal is to tap the feed to the speaker with a line level converter. All the amplified signals are already crossed over, so it matters where you take the signal from.

Read up on previous posts and it will tell you where to tap for the signal type you need.

 

[bennyinArizona]

ok

Thanks guys